Tin MarketSize, Share & Industry Analysis, 2026-2034By ProductBy TypeBy ApplicationBy End-use IndustryBy Source
Full title & scope — all 5 axes with their segments
Tin Market Size, Share & Industry Analysis, By Product (Metal, Alloy, Compoun), By Type (Pyrogenic Process, Electrolytic Process, Others), By Application (Soldering, Tin Plating, Specialized Alloy, Lead-acid Battery, Chemicals, Other Applications), By End-use Industry (Automotive, Electronics, Packaging, Glass, Other End-user Industries), By Source (Primary (Virgin) Tin, Secondary (Recycled) Tin), and Regional Forecast, 2026-2034
Segment definitions and share of revenue by product, animal, end user and region.
- 01By ProductMetal · Alloy · Compoun
- 02By TypePyrogenic Process · Electrolytic Process · Others
- 03By ApplicationSoldering · Tin Plating · Specialized Alloy
- 04By End-use IndustryAutomotive · Electronics · Packaging
- 05By SourcePrimary · Secondary
- 06By Region
Market Analysis & Outlook
Tin is a base metal supplied as refined metal, alloys and chemical compounds derived from cassiterite ore, sold in forms ranging from ingots and bars to wire, powder and liquid stabilizer formulations. It is bought by electronics assemblers for solder, by canmakers and platers for corrosion-resistant coatings, by alloy producers for bronze, pewter and bearing metals, and by chemical manufacturers for PVC stabilizers and specialty catalysts. Buyers range from large original equipment manufacturers negotiating direct smelter contracts to smaller alloy and plating shops sourcing through distributors.
Growth of 4.19% a year carries the global tin market from USD 8.75 billion in 2025 to USD 12.64 billion in 2034. The full series behind that rate covers USD 7.1 billion in 2020, USD 8.4 billion in 2024, USD 9.1 billion in 2026 and USD 10.71 billion in 2030, with 2025 as the base year.
The product mix shifts over the period. Metal is the largest line in 2025 at USD 3.9375 billion, a 45% share, moving to USD 5.4352 billion and 43% by 2034. Compoun grows fastest at 4.62%, taking its share from 15% to 15.5%, while Metal grows slowest at 3.66%. Share moves toward Alloy and Compoun and away from Metal, though no line shrinks in revenue terms.
The type split puts Pyrogenic Process first, at USD 5.95 billion and 68% of revenue in 2025, rising to USD 8.216 billion and 65% in 2034. Electrolytic Process grows faster at 5.4% against 3.65%, moving from 27% of revenue to 30% by 2034. It cuts the same total as the product axis from a different commercial angle, so revenue does not add across the two.
Asia Pacific is the largest region at 59.1% of 2025 revenue, worth USD 5.17125 billion and reaching USD 7.7104 billion by 2034. Europe follows at 17.3%, moving from USD 1.51375 billion to USD 2.0224 billion, and Middle East and Africa is the smallest at 4%. Asia Pacific gain share across the period, so growth is not distributed evenly between regions.
Coverage extends to five regions, three product lines and five segmentation axes over the full fifteen years. The 2025 total itself is triangulated from published sources and category proxies, with no independently sourced count behind it, and the splits below are estimated on that same basis, a bound on their precision worth carrying into any use of them.
Market Size, 2020–2034
USD BillionRevenue in USD Billion. Values up to 2025 are actuals; 2026–2034 are forecast.
Key Takeaways
- A forecast-period rate of 4.19% takes the market from USD 8.75 billion in 2025 to USD 12.64 billion in 2034, against 4.27% recorded over the 2020-2025 historical period.
- The largest line by product is Metal, worth USD 3.9375 billion and 45% of revenue in 2025, rising to USD 5.4352 billion and 43% by 2034.
- Compoun is the fastest-growing line at 4.62%, lifting its share from 15% in 2025 to 15.5% in 2034 and its revenue from USD 1.3125 billion to USD 1.9592 billion.
- Against a base case of USD 12.64 billion in 2034, the study also reports a bear case at USD 11.63 billion and a bull case at USD 13.65 billion, with the assumptions behind each set out separately.
- The largest region is Asia Pacific, generating USD 5.17125 billion in 2025 (59.1% of the global total) and USD 7.7104 billion by 2034, ahead of Europe at 17.3%.
- 50.28% of Asia Pacific's base-year revenue comes from China alone: USD 2.6 billion in 2025, rising to USD 3.85 billion by 2034, which is why it is that region's worked example.
- Fifteen years are reported, 2020 to 2034 with 2025 as the base: revenue, share and growth rate per line, per axis and per region, not as a single blended series.
Market Trends
Revenue Share, By By Product
Base year 2025Metal leads with 45.0% of by product segment revenue.
Share of by product segment revenue, most recent base year.
Read across the forecast period, the global tin market shows movement in three places: product composition, regional weight, and the 4.19% rate applied to the whole.
Not one of them points downward. Growth is everywhere in absolute terms, and the interest is entirely in where it lands.
Compoun grows faster than Metal. Compoun grows at 4.62% across 2026-2034 against 3.66% for Metal, the widest spread on the product axis. Compoun takes its share of revenue from 15% to 15.5% while Metal gives up ground, from 45% to 43%. In absolute terms Compoun rises from USD 1.3125 billion to USD 1.9592 billion, while Metal rises from USD 3.9375 billion to USD 5.4352 billion. Both grow; the gap is wide enough to reshape the mix inside a single forecast window.
The regional balance moves. Asia Pacific moves from 59.1% of revenue in 2025 to 61% in 2034, worth USD 5.17125 billion rising to USD 7.7104 billion. Against that, Europe at 17.3% moving to 16%, North America at 13.6% moving to 13%, Latin America at 6% moving to 6%, Middle East and Africa at 4% moving to 4%, a fall in share, not in revenue. Revenue added in this market is therefore concentrating geographically instead of spreading evenly, and a participant weighted toward a share-losing region grows more slowly than the market even while its own revenue climbs.
Growth compounds at 4.19% without a step change. Reading the series: USD 7.1 billion in 2020, USD 8.4 billion in 2024, USD 8.75 billion in 2025, USD 9.1 billion in 2026, USD 10.71 billion in 2030 and USD 12.64 billion in 2034. The forecast rate of 4.19% sits against 4.27% over the historical period, so the projection extends an observed trend instead of proposing a new one. A plan built on this market is therefore a plan about capturing a share of steady expansion, which is decided on the product and regional axes, not by the headline rate.
Market Growth Factors
The fastest line decides the blended rate
Market Drivers
3- 01The fastest line decides the blended rate
The fastest line on the product axis is Compoun, at 4.62% against the market's 4.19%, taking USD 1.3125 billion to USD 1.9592 billion and 15% of revenue to 15.5%. Nothing else on the axis grows as fast (Metal manages 3.66%) so the blended 4.19% is carried by this one line instead of shared across them. A portfolio weighted away from it tracks below the market even in a market growing everywhere.
- 02Asia Pacific carries 59.1% of the base and keeps growing
Asia Pacific is the largest region at USD 5.17125 billion in 2025, 59.1% of global revenue, and reaches USD 7.7104 billion by 2034 on a share rising to 61%. Europe is next at 17.3% of revenue, USD 1.51375 billion in 2025 and USD 2.0224 billion in 2034. Together the two account for the majority of both the 2025 base and the revenue added by 2034, which is why a regional plan treating all five regions at equal weight misreads where the growth actually lands.
- 03The trend is already in the record
USD 7.1 billion in 2020, USD 8.4 billion in 2024 and USD 8.75 billion in 2025: 4.27% compound growth before the forecast period even begins. The forecast continues at 4.19% to USD 12.64 billion in 2034. A forecast extending an observed trend is a different proposition from one proposing a turn, and that is why no ramp is applied: the 4.19% runs evenly across the period.
Growth drivers
| # | Growth driver | Impact | Gross contribution (Billion) | 2026-28 | 2029-31 | 2032-34 |
|---|---|---|---|---|---|---|
| 1 | Electronics and Semiconductor Solder Demand | High | +1.6 | High | High | Medium |
| 2 | Renewable Energy and Energy Storage Applications | Medium-High | +0.85 | Medium | High | High |
| 3 | Tin Chemicals Growth in PVC Stabilizers and Battery Additives | Medium-High | +0.7 | Medium | Medium | High |
| 4 | Automotive Electrification and Rising Electronics Content per Vehicle | Medium | +0.55 | Low | Medium | Medium |
| 5 | Growth in Secondary Tin Recovery Supporting Supply Availability | Medium | +0.4 | Medium | Medium | Low |
| 6 | Others | Low | +0.89 | Medium | Medium | Medium |
| Total | +4.99 | |||||
Restraints
| # | Restraint | Impact | Estimated reduction (Billion) | 2026-28 | 2029-31 | 2032-34 |
|---|---|---|---|---|---|---|
| 1 | Tin Price Volatility Discouraging Long-Term Contracting | Medium-High | −0.55 | High | Medium | Medium |
| 2 | Lead-Free and Alternative Material Substitution in Select Applications | Medium | −0.3 | Low | Medium | Medium |
| 3 | Supply Concentration and Export Policy Risk in Leading Producing Countries | Medium | −0.25 | Medium | Medium | Low |
| Total | −1.1 | |||||
Drivers contribute 4.99 Billion and restraints remove 1.1 Billion, a net 3.89 Billion, which is the revenue the market adds between the base year and 2034. Contributions are CDI estimates, apportioned so that they reconcile with the forecast rather than being read from it.
The 4.19% forecast rate rests on three things that can be measured separately: the size of the existing base, the mix shift on the product axis, and where regional growth is concentrated.
Restraining Factors
Downside case: USD 11.63 billion by 2034, against USD 12.64 billion in the base case
Market Restraints
2- 01Downside case: USD 11.63 billion by 2034, against USD 12.64 billion in the base case
The study's downside path assumes bear case assumes accelerated substitution away from tin-based solder in select applications, slower recovery in consumer electronics demand, and continued tin price volatility that discourages long-term procurement contracts, and ends 2034 at USD 11.63 billion against the USD 12.64 billion base case, the same USD 8.75 billion base year, a slower forecast period.
- 02Metal grows below the market rate
Metal carries 45% of 2025 revenue at USD 3.9375 billion but compounds at 3.66% against 4.19% for the market, taking its share to 43% by 2034 even as revenue rises to USD 5.4352 billion. Because it carries that much of the base, its pace holds the blended rate down more than any faster line lifts it.
Market Opportunities
Upside case: USD 13.65 billion by 2034
Market Opportunities
2- 01Upside case: USD 13.65 billion by 2034
What would beat the forecast: bull case assumes faster adoption of tin-based solder in renewable energy and power electronics alongside sustained electronics production growth in Asia, without a matching rise in secondary tin supply to offset it. That case reaches USD 13.65 billion in 2034 against USD 12.64 billion, and it is worth testing against a reader's own read of the market.
- 02Compoun share moves from 15% to 15.5%
Compoun grows at 4.62% against 4.19% for the market, adding revenue from USD 1.3125 billion in 2025 to USD 1.9592 billion in 2034 and taking its share from 15% to 15.5%. It is the place on this axis where share changes hands at scale, so it is where an entrant can take position without displacing the incumbent in Metal.
Market Challenges
Concentration on the product axis
Market Challenges
2- 01Concentration on the product axis
Metal is 45% of 2025 revenue at USD 3.9375 billion and still 43% at USD 5.4352 billion in 2034. That concentration means the market's own forecast is, to a large extent, a forecast for one product line.
- 02China is 50.28% of Asia Pacific
50.28% of the leading region is one country: China, at USD 2.6 billion against Asia Pacific's USD 5.17125 billion in 2025, and USD 3.85 billion by 2034. Regional totals therefore move largely with one country's demand, so a regional forecast is more exposed to single-country conditions than its size alone suggests.
Segmentation Analysis
5 axesThe global tin market is cut five ways: by product, type, application, end-use industry and source. Every one of them divides the same revenue, which makes them views of one market from different commercial angles, not components of it.
Three product lines are reported. Two of them take share over the forecast period and the other gives it up, though every line grows in absolute terms between 2025 and 2034.
By Product · 3 segments
Scale in Metal and Growth in Compoun Define the Product Axis
- Largest Metal · 45%
- Fastest Compoun · 4.6%
- Moves most Metal · -2 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Metal | $3.94B | 45% | $5.44B | 43%-2 | 3.7% |
| Alloy | $3.50B | 40% | $5.25B | 41.5%+1.5 | 4.6% |
| Compoun | $1.31B | 15% | $1.96B | 15.5%+0.5 | 4.6% |
Metal remains the leading product form because refined tin ingots and bars are the base input that platers, chemical processors and alloy producers all draw from before shaping it further into finished forms. Compound is the fastest growing line as manufacturers increasingly convert refined tin into stannous and organotin chemistries for PVC stabilizers and emerging battery formulations, pulling demand toward chemical conversion instead of simple ingot resale. By 2034 Metal is still ahead, making this a shift in weight, not a change of leader. Every year of the series is priced on this axis, making it the reference cut for the rest of the report.
By Type · 3 segments
Pyrogenic Process Led by Type in 2025, with Electrolytic Process Growing Fastest
- Largest Pyrogenic Process · 68%
- Fastest Electrolytic Process · 5.4%
- Moves most Pyrogenic Process · -3 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Pyrogenic Process | $5.95B | 68% | $8.22B | 65%-3 | 3.6% |
| Electrolytic Process | $2.36B | 27% | $3.79B | 30%+3 | 5.4% |
| Others | $0.44B | 5% | $0.63B | 5% | 4.2% |
Pyrogenic smelting leads because most tin ore concentrates are still reduced through conventional furnace routes that established smelters already operate at scale, keeping capital costs lower than switching to an alternative refining path. Electrolytic processing is growing fastest as buyers in electronics and specialty alloys increasingly require the higher purity that electrolytic refining delivers, a purity standard that furnace-based output does not consistently match. The order does not change: Pyrogenic Process is still largest in 2034, and what moves is how much it holds.
By Application · 6 segments
Chemicals Outpaces the Axis While Soldering Holds the Largest Share
- Largest Soldering · 48%
- Fastest Chemicals · 6%
- Moves most Tin Plating · -2 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Soldering | $4.20B | 48% | $6.19B | 49%+1 | 4.4% |
| Tin Plating | $1.31B | 15% | $1.64B | 13%-2 | 2.5% |
| Specialized Alloy | $0.88B | 10% | $1.14B | 9%-1 | 3% |
| Lead-acid Battery | $0.70B | 8% | $0.88B | 7%-1 | 2.6% |
| Chemicals | $1.05B | 12% | $1.77B | 14%+2 | 6% |
| Other Applications | $0.61B | 7% | $1.01B | 8%+1 | 5.7% |
Soldering leads because printed circuit assembly and semiconductor packaging still consume more tin than any other single use, a dependency that has not eased even as lead-free formulations spread. Chemicals is growing fastest as tin-based stabilizers gain ground in PVC compounding and as newer battery chemistries adopt tin-based additives, categories that barely registered in the prior generation of demand for this market. Soldering remains the largest line through 2034, so the axis changes in proportion, not in order.
By End-use Industry · 5 segments
Electronics Led by End-use industry in 2025, with Other End-user Industries Growing Fastest
- Largest Electronics · 38%
- Fastest Other End-user Industries · 5.1%
- Moves most Electronics · +3 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Automotive | $1.75B | 20% | $2.40B | 19%-1 | 3.6% |
| Electronics | $3.33B | 38% | $5.18B | 41%+3 | 5% |
| Packaging (Food and Beverages) | $1.57B | 18% | $1.90B | 15%-3 | 2.1% |
| Glass | $1.05B | 12% | $1.52B | 12% | 4.2% |
| Other End-user Industries | $1.05B | 12% | $1.64B | 13%+1 | 5.1% |
Electronics leads because consumer devices, telecommunications infrastructure and industrial control systems all rely on tin solder at every assembly stage, a dependency that automotive and packaging uses do not match at comparable scale. Other end-user industries are growing fastest as renewable energy equipment and energy storage systems adopt tin-based soldering and alloying in applications that did not exist at meaningful scale a decade ago. Electronics remains the largest line through 2034, so the axis changes in proportion, not in order.
By Source · 2 segments
Primary (Virgin) Tin Held the Dominant Share of the Source Segment in 2025
- Largest Primary (Virgin) Tin · 82%
- Fastest Secondary (Recycled) Tin · 6.5%
- Moves most Primary (Virgin) Tin · -4 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Primary (Virgin) Tin | $7.17B | 82% | $9.86B | 78%-4 | 3.6% |
| Secondary (Recycled) Tin | $1.57B | 18% | $2.78B | 22%+4 | 6.5% |
Primary tin leads because most smelters are still built around processing freshly mined concentrate, and long-term offtake agreements with mines keep that supply channel dominant across the forecast. Secondary tin is growing fastest as recyclers recover tin more efficiently from electronic scrap and dross, and as manufacturers facing tighter environmental targets treat recycled content as a differentiator worth paying for. By 2034 Primary (Virgin) Tin is still ahead, making this a shift in weight, not a change of leader.
Regional Insights
Regional Revenue Share
Base year 2025Share of global revenue in the base year.
Only the leading region's share is published outside the report; pins mark the region, not a specific country.
Asia Pacific Market Analysis
The largest region covered, and the one gaining the most — it picks up 1.9 points of share by 2034.
- Rank 1 of 5
- 2025 share 59.1%
- By 2034 61%
- Revenue $5.17B → $7.71B
USD 5.17125 billion of 2025 revenue is generated in Asia Pacific, 59.1% of the global tin market and reaches USD 7.7104 billion by 2034. Among the five regions it ranks first by revenue in both years.
Share climbs to 61% by 2034, at a pace above the 4.19% global rate, so this region warrants separate treatment and should not be scaled off the total.
Segment composition follows the global pattern: Metal largest at 45% of 2025 revenue, Compoun fastest at 4.62%. Per-axis and per-country detail for Asia Pacific sits in the full report.
China
The largest market in Asia Pacific, growing 1.5×.
- In region 1 of 3
- Of region 50.3%
- Of global 29.7%
- Revenue $2.60B → $3.85B
50.28% of Asia Pacific's base-year revenue comes from China; USD 2.6 billion, rising to USD 3.85 billion by 2034. It accounts for 50.28% of regional revenue in the base year, the largest single share without dominating the region outright. The region itself runs USD 5.17125 billion to USD 7.7104 billion over the same period, and this is the market carrying the country-level detail in the full report.
The product pattern in China is the global one: 45% of 2025 revenue in Metal, 43% by 2034, against 4.62% growth in Compoun taking it from 15% to 15.5%. With 50.28% of Asia Pacific concentrated here, a change in this country's mix is visible in the regional figures instead of being diluted by its neighbours. Revenue by product for China is reported separately in the full report.
Tin production and trade in China fall under the Ministry of Industry and Information Technology, which oversees smelter capacity and production standards for non-ferrous metals, alongside the Ministry of Ecology and Environment for emissions and effluent controls at smelting and refining sites. Tin ingots and related products must conform to national standards issued through the Standardization Administration, covering purity grades and chemical composition for commercial-grade tin. Exporters and importers work within customs classification rules set by the General Administration of Customs, and mining operations require permits from natural resources authorities covering extraction rights and environmental impact review. Suppliers marketing tin for food-contact or solder applications must additionally meet composition limits tied to downstream use, since raw tin itself carries no separate safety certification beyond metallurgical grading and environmental compliance at the point of production.
In China the field is YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd. and and others.. Metal, at 45% of 2025 revenue, is where the volume sits, and Compoun, growing at 4.62%, is where position changes hands over the forecast period. Per-company positioning and share at country level are in the full report only.
Indonesia
2nd-largest in Asia Pacific, growing 1.5×.
- In region 2 of 3
- Of region 20.3%
- Of global 12%
- Revenue $1.05B → $1.54B
Within Asia Pacific, Indonesia accounts for 20.31% of regional revenue and 12% of the global total, worth USD 1.05 billion in 2025 and USD 1.54 billion by 2034.
Malaysia
3rd-largest in Asia Pacific, growing 1.4×.
- In region 3 of 3
- Of region 10.6%
- Of global 6.3%
- Revenue $0.55B → $0.77B
Within Asia Pacific, Malaysia accounts for 10.64% of regional revenue and 6.29% of the global total, worth USD 0.55 billion in 2025 and USD 0.77 billion by 2034.
Europe Market Analysis
The 2nd-largest region covered — 1.3 points of share move elsewhere by 2034.
- Rank 2 of 5
- 2025 share 17.3%
- By 2034 16%
- Revenue $1.51B → $2.02B
USD 1.51375 billion of 2025 revenue is generated in Europe, 17.3% of the global tin market rising to USD 2.0224 billion in 2034. It is a mid-sized region on this axis, second by revenue throughout the period.
Share settles at 16% in 2034, a shift in share, not in direction: revenue climbs every year while the market's centre of gravity moves elsewhere.
Segment composition follows the global pattern: Metal largest at 45% of 2025 revenue, Compoun fastest at 4.62%. Per-axis and per-country detail for Europe sits in the full report.
Germany
The largest market in Europe, growing 1.3×.
- In region 1 of 2
- Of region 40.3%
- Of global 7%
- Revenue $0.61B → $0.81B
USD 0.61 billion of Europe's 2025 revenue is generated in Germany, the region's largest market, reaching USD 0.81 billion by 2034. Its 40.3% of base-year regional revenue leads the region, though enough sits elsewhere that Europe is not a proxy for it. The region itself runs USD 1.51375 billion to USD 2.0224 billion over the same period, and this is the market carrying the country-level detail in the full report.
Germany buys along the same lines as the market globally; Metal first at 45% of 2025 revenue and 43% in 2034, Compoun fastest at 4.62% on a share moving from 15% to 15.5%. With 40.3% of Europe concentrated here, a change in this country's mix is visible in the regional figures instead of being diluted by its neighbours. The full report reports Germany by product separately.
As an EU member state, Germany applies the REACH Regulation to tin and tin compounds, requiring registration of substances placed on the market and safety data sheets covering handling, exposure limits and downstream use. The Federal Institute for Occupational Safety and Health enforces workplace exposure controls at smelting and processing sites, while the Federal Environment Agency oversees emissions and waste handling under German environmental law. Tin destined for food-contact packaging or solder in electronics must additionally meet the EU RoHS Directive where lead-free formulations are mandated, and conformity is typically demonstrated through supplier declarations referencing harmonised European standards for metal purity and composition. Traders and processors must retain documentation showing the substance's origin and compliance status when tin moves through the wider EU single market, rather than relying on any purely national approval step.
Competition in Germany runs between the suppliers this study tracks: YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd. and and others.. The commercially relevant division is 45% of 2025 revenue in Metal, where the volume is, against 4.62% growth in Compoun, where share moves. Weighting toward Europe means competing for 17.3% of 2025 global revenue, a base of USD 1.51375 billion moving to USD 2.0224 billion across the forecast period.
Netherlands
2nd-largest in Europe, growing 1.3×.
- In region 2 of 2
- Of region 25.1%
- Of global 4.3%
- Revenue $0.38B → $0.50B
4.34% of global revenue is generated in the Netherlands; USD 0.38 billion in 2025, reaching USD 0.5 billion in 2034, and 25.1% of Europe.
North America Market Analysis
The 3rd-largest region covered — 0.6 points of share move elsewhere by 2034.
- Rank 3 of 5
- 2025 share 13.6%
- By 2034 13%
- Revenue $1.19B → $1.64B
North America holds 13.6% of the global tin market in 2025, worth USD 1.19 billion rising to USD 1.6432 billion in 2034. Among the five regions it ranks third by revenue in both years.
13% of global revenue sits here in 2034, below the 2025 level, and the region keeps growing in absolute terms while others expand faster, a change in relative weight, not a decline in demand.
Metal leads here as it does globally, at 45% of 2025 revenue, and Compoun again grows fastest at 4.62%. North America is reported axis by axis and country by country in the full study.
United States
Sets the pace for North America at 75.6% of it, growing 1.4×.
- In region 1 of 2
- Of region 75.6%
- Of global 10.3%
- Revenue $0.90B → $1.23B
USD 0.9 billion of North America's 2025 revenue is generated in the United States, the region's largest market, reaching USD 1.23 billion by 2034. Because it is 75.63% of the region in the base year, North America's totals move with this one country instead of a spread of them. Regional revenue of USD 1.19 billion in 2025 and USD 1.6432 billion in 2034 sits around it, and it is the country used wherever the full report cuts a figure by geography.
Composition here matches the global split: the largest line is Metal at 45% of 2025 revenue, easing to 43% by 2034, and the fastest is Compoun at 4.62%, from 15% to 15.5%. Since 75.63% of North America's revenue is generated here, the regional numbers inherit this market's mix instead of smoothing it out. Revenue by product for the United States is reported separately in the full report.
Tin is regulated in the United States chiefly through the Environmental Protection Agency, which governs air and water emissions from smelting and refining operations under the Clean Air Act and Clean Water Act, and through the Occupational Safety and Health Administration, which sets workplace exposure limits for tin dust and fumes. The Food and Drug Administration oversees tin compounds used in food-contact coatings or packaging, requiring conformity with its indirect food additive provisions. ASTM International standards define commercial grades and purity specifications that buyers commonly reference in supply contracts, though these are voluntary rather than mandatory. Importers must classify tin correctly under the Harmonized Tariff Schedule administered by Customs and Border Protection, and any supplier serving electronics or solder markets should confirm alignment with recognized industry purity benchmarks rather than a single federal certification scheme.
Competition in the United States runs between the suppliers this study tracks: YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd. and and others.. The commercially relevant division is 45% of 2025 revenue in Metal, where the volume is, against 4.62% growth in Compoun, where share moves. That makes North America a 13.6% share of 2025 global revenue, USD 1.19 billion rising to USD 1.6432 billion, for any supplier deciding where to concentrate.
Canada
2nd-largest in North America, growing 1.4×.
- In region 2 of 2
- Of region 24.4%
- Of global 3.3%
- Revenue $0.29B → $0.41B
3.31% of global revenue is generated in Canada; USD 0.29 billion in 2025, reaching USD 0.41 billion in 2034, and 24.37% of North America.
Latin America Market Analysis
The 4th-largest region covered, holding its share flat through 2034.
- Rank 4 of 5
- 2025 share 6%
- By 2034 6%
- Revenue $0.53B → $0.76B
USD 0.525 billion of 2025 revenue is generated in Latin America, 6% of the global tin market rising to USD 0.7584 billion in 2034. By revenue it sits fourth across the study, and the ranking does not change between 2025 and 2034.
6% of global revenue sits here in 2034, below the 2025 level, though revenue still rises throughout; the shift is in the region's weight against faster-growing ones, which is not the same as weakening demand.
The product mix reported at global level applies here, with Metal the largest line at 45% of 2025 revenue and Compoun the fastest-growing at 4.62%. The full report breaks Latin America out along every axis and by country.
Peru
The largest market in Latin America, growing 1.4×.
- In region 1 of 2
- Of region 55.2%
- Of global 3.3%
- Revenue $0.29B → $0.42B
Peru is the largest market within Latin America, generating USD 0.29 billion in 2025 and projected to reach USD 0.42 billion by 2034. Its 55.24% of base-year regional revenue leads the region, though enough sits elsewhere that Latin America is not a proxy for it. Regional revenue of USD 0.525 billion in 2025 and USD 0.7584 billion in 2034 sits around it, and it is the country used wherever the full report cuts a figure by geography.
Peru buys along the same lines as the market globally; Metal first at 45% of 2025 revenue and 43% in 2034, Compoun fastest at 4.62% on a share moving from 15% to 15.5%. Since 55.24% of Latin America's revenue is generated here, the regional numbers inherit this market's mix instead of smoothing it out. Per-product revenue for Peru appears on its own in the full report.
Peru's Ministry of Energy and Mines governs tin mining and concentrate production, issuing the concessions and environmental certifications required before extraction can proceed, while the National Environmental Certification Service for Sustainable Investments reviews environmental impact studies for new or expanded operations. The National Superintendency of Labor Inspection enforces occupational safety standards at mine sites and smelters, and Peru's technical standards body, INACAL, publishes specifications for tin purity and grading that exporters commonly reference in commercial contracts. Because a large share of Peru's tin output is exported as refined metal, shipments must also meet the customs classification and documentation requirements of the National Superintendency of Customs and Tax Administration. Suppliers should expect scrutiny of mine-to-market traceability given ongoing attention to responsible sourcing in the region's mineral trade.
YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd. and and others. are the suppliers covered in Peru. Volume sits in Metal at 45% of 2025 revenue; movement sits in Compoun at 4.62% growth. Weighting toward Latin America means competing for 6% of 2025 global revenue, a base of USD 0.525 billion moving to USD 0.7584 billion across the forecast period.
Bolivia
2nd-largest in Latin America, growing 1.4×.
- In region 2 of 2
- Of region 30.5%
- Of global 1.8%
- Revenue $0.16B → $0.23B
Within Latin America, Bolivia accounts for 30.48% of regional revenue and 1.83% of the global total, worth USD 0.16 billion in 2025 and USD 0.23 billion by 2034.
Middle East and Africa Market Analysis
The 5th-largest region covered, holding its share flat through 2034.
- Rank 5 of 5
- 2025 share 4%
- By 2034 4%
- Revenue $0.35B → $0.51B
In Middle East and Africa, 4% of global revenue puts 2025 at USD 0.35 billion rising to USD 0.5056 billion in 2034. It is a marginal region on this axis, fifth by revenue throughout the period.
4% of global revenue sits here in 2034, below the 2025 level, a shift in share, not in direction: revenue climbs every year while the market's centre of gravity moves elsewhere.
The product mix reported at global level applies here, with Metal the largest line at 45% of 2025 revenue and Compoun the fastest-growing at 4.62%. Per-axis and per-country detail for Middle East and Africa sits in the full report.
South Africa
The largest market in Middle East and Africa, growing 1.4×.
- In region 1 of 2
- Of region 45.7%
- Of global 1.8%
- Revenue $0.16B → $0.23B
South Africa is the largest market within Middle East and Africa, generating USD 0.16 billion in 2025 and projected to reach USD 0.23 billion by 2034. At 45.71% of the region in 2025 it leads, but a majority of Middle East and Africa's revenue is generated in other markets. The region itself runs USD 0.35 billion to USD 0.5056 billion over the same period, and this is the market carrying the country-level detail in the full report.
Demand in South Africa follows the product mix reported at global level: Metal is the largest line at 45% of 2025 revenue, moving to 43% by 2034, while Compoun grows fastest at 4.62% and takes its share from 15% to 15.5%. Since 45.71% of Middle East and Africa's revenue is generated here, the regional numbers inherit this market's mix instead of smoothing it out. Revenue by product for South Africa is reported separately in the full report.
Tin mining and processing in South Africa fall under the Department of Mineral Resources and Energy, which administers mining rights and environmental authorizations through the Mineral and Petroleum Resources Development Act framework. The Department of Forestry, Fisheries and the Environment reviews environmental impact assessments tied to extraction and beneficiation activities, and the Department of Employment and Labour enforces occupational health and safety requirements at mine and smelter sites. The South African Bureau of Standards publishes specifications covering metal purity and grading that suppliers reference for commercial and industrial buyers, particularly where tin feeds into electronics or solder applications. Exporters must also satisfy customs classification rules administered by the South African Revenue Service, and companies operating in the sector are expected to demonstrate compliance with broader mineral beneficiation policy aims rather than treating extraction and export as a purely commercial transaction.
The suppliers tracked in this study (YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd. and and others.) compete in South Africa across the product lines above. Two different problems sit on the same axis: holding Metal at 45% of 2025 revenue, and taking Compoun while it grows at 4.62%. Weighting toward Middle East and Africa means competing for 4% of 2025 global revenue, a base of USD 0.35 billion moving to USD 0.5056 billion across the forecast period.
United Arab Emirates
2nd-largest in Middle East and Africa, growing 1.5×.
- In region 2 of 2
- Of region 28.6%
- Of global 1.1%
- Revenue $0.10B → $0.15B
1.14% of global revenue is generated in the United Arab Emirates; USD 0.1 billion in 2025, reaching USD 0.15 billion in 2034, and 28.57% of Middle East and Africa.
Request this sample to see the full data tables and segment-level detail behind this analysis.
Report Coverage
This report assesses the market across every segment, with revenue and a growth rate for each line in each year of the study period. It covers the drivers, trends, opportunities, restraints and challenges shaping growth, the competitive landscape and the companies profiled, and the research methodology behind every estimate. Segmentation is reported by Product, Type, Application, End-use Industry, Source, and regional analysis covers Asia Pacific, Europe, North America, Latin America, Middle East and Africa, each broken out by country.
Competitive Landscape
Suppliers Compete on Metal Volume and Compoun Momentum
Suppliers in scope: YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd. and and others..
Where suppliers actually compete is along the product axis. Metal is 45% of 2025 revenue at USD 3.9375 billion and still 43% in 2034, so it is where the volume sits and where an incumbent's position is hardest to move. Movement is concentrated in Compoun; 4.62% growth, against 3.66% at the other end of the axis in Metal. Holding the first and taking the second are separate capabilities, which is why a market of USD 8.75 billion supports as many suppliers as it does.
Competitive position in the tin market rests on smelting scale and ore access rather than brand, since refined tin is a commodity input bought on purity and delivery reliability. The largest producers hold integrated mine to smelter positions that stabilize feedstock and let them absorb ore price swings that squeeze standalone smelters. Regional and mid-sized refiners compete on proximity to buyers, faster order turnaround and willingness to supply smaller lot sizes that large groups deprioritize. Recycling capability is becoming a real differentiator as buyers with sustainability targets seek certified secondary tin content alongside primary metal.
The regional picture sets the entry cost: 59.1% of revenue is in Asia Pacific and 17.3% in Europe, so a credible global position requires both, while Middle East and Africa at 4% can be served opportunistically.
Per-company profiles, financials, share and development history are in the full report and not here.
List of Key Tin Market Companies Profiled
13 companies profiled. Company profiles, including financials, product portfolios and recent developments, are part of the full report.
- YUNNAN TIN COMPANY GROUP LIMITED(China)
- PT TIMAH Tbk(Indonesia)
- Malaysia Smelting Corporation Berhad(Malaysia)
- Yunnan Chengfeng Nonferrous Metals Co. Ltd(China)
- Empresa Metalú
- rgica Vinto S.A
- Gejiu Zili Mining and Smelting Co., Ltd.(China)
- Guangxi China Tin Group(China)
- Malaysia Smelting Corporation(Malaysia)
- Metallo-Chimique International N.V.(Belgium)
- Minsur S.A.(Peru)
- Thailand Smelting and Refining Co., Ltd.(Thailand)
- and others.
Geographic Coverage
Every market below is broken out separately in the report.
Asia Pacific
12Europe
8North America
3Latin America
3Middle East and Africa
4Key Insights
Report Scope
Study parameters & segmentationThis study covers market size and forecasts over the 2020–2034 period, segmentation across 5 axes (Product, Type, Application, End-use Industry, Source), regional analysis for 5 regions and their constituent countries, a competitive landscape profiling 13 key companies, and the research methodology behind every estimate.
Segmentation
5 axes + regionFull chapter-and-section structure of the report. Segment, region, and company breakdowns are listed as scope. The underlying figures are in the sample and full report.
Table of Contents+−
Chapter 1.Executive Summary
Chapter 2.Premium Insights
Chapter 3.Market Definition
Chapter 4.Research Methodology
Chapter 5.Strategic Imperatives & Market Outlook
Chapter 6.Go-to-Market (GTM) Strategies
Chapter 7.Market Trends, Strategy & Dynamics
Chapter 8.Porter's Five Forces
Chapter 9.PESTEL Analysis
Chapter 10.Value Chain Analysis
Chapter 11.Supply Chain Analysis
Chapter 12.Macro-Economic Factors
Chapter 13.Market Cost Analysis
Chapter 14.Market Supply-Side Analysis
Chapter 15.Global Tin Market Size & Projections, 2020–2034, Revenue (USD Billion)
Chapter 16.Global Tin Market Overview, By Product, 2020–2034, Revenue (USD Billion)
Chapter 17.Global Tin Market Overview, By Type, 2020–2034, Revenue (USD Billion)
Chapter 18.Global Tin Market Overview, By Application, 2020–2034, Revenue (USD Billion)
Chapter 19.Global Tin Market Overview, By End-use Industry, 2020–2034, Revenue (USD Billion)
Chapter 20.Global Tin Market Overview, By Source, 2020–2034, Revenue (USD Billion)
Chapter 21.Global Tin Market Size — Segment Comparison
Chapter 22.Global Tin Geography Overview, 2020–2034, Revenue (USD Billion)
Chapter 23.Asia Pacific Tin Market Deep-Dive, 2020–2034, Revenue (USD Billion)
Chapter 24.Europe Tin Market Deep-Dive, 2020–2034, Revenue (USD Billion)
Chapter 25.North America Tin Market Deep-Dive, 2020–2034, Revenue (USD Billion)
Chapter 26.Latin America Tin Market Deep-Dive, 2020–2034, Revenue (USD Billion)
Chapter 27.Middle East and Africa Tin Market Deep-Dive, 2020–2034, Revenue (USD Billion)
Chapter 28.Application / Use-Case Analysis
Chapter 29.Vendor Capability Scorecard
Chapter 30.Scenario Forecasts
Chapter 31.Top 10 Key Clients of Top 10 Players
Chapter 32.Top 10 Suppliers
Chapter 33.Competitive Landscape
Chapter 34.Partnerships & M&A
Chapter 35.Key Vendor Analysis
Chapter 36.Marketing Strategy Analysis, Distributors & Traders
Chapter 37.Outlook of the Market
Chapter 38.Concluding Analyst Note
List of Figures+−
Structural index generated from this report's own section headings, not verified against the delivered report's actual figure numbering.
List of Tables+−
Structural index generated from this report's own section headings, not verified against the delivered report's actual table numbering.
Segmentation Analysis
5 axesBy Product
3- 01Metal
- 02Alloy
- 03Compoun
By Type
3- 01Pyrogenic Process
- 02Electrolytic Process
- 03Others
By Application
6- 01Soldering
- 02Tin Plating
- 03Specialized Alloy
- 04Lead-acid Battery
- 05Chemicals
- 06Other Applications
By End-use Industry
5- 01Automotive
- 02Electronics
- 03Packaging (Food and Beverages)
- 04Glass
- 05Other End-user Industries
By Source
2- 01Primary (Virgin) Tin
- 02Secondary (Recycled) Tin
Segment categories shown for scope reference. See the Summary tab for revenue share by By Product. Full segment-by-segment detail across every axis is available in the sample and full report.
Research approach
A market size is a claim about the world, and a claim is only as good as the route to it. Every study is built upward from units and prices — what is actually produced, sold or performed, at what it actually changes hands for — rather than from a headline figure divided downwards. Disclosed company revenue is then used to check that build, not to produce it.
The estimate is built upward from refined tin production volumes reported by national mineral associations and by smelters such as PT Timah and Yunnan Tin, converted to revenue using realized average tin prices drawn from London Metal Exchange cash settlement data plus regional delivery premiums. Consumption-side volumes for solder, tinplate and tin chemicals are built from wire, ingot and stabilizer shipment data by application. The bottom-up total is then checked against disclosed segment revenue from listed smelters and alloy producers; where the two diverge, the correction is made to the underlying tonnage or price assumption feeding the bottom-up build, not by averaging in the disclosed figure.
The four stages
The same sequence runs behind every published study, whatever the industry. The order matters as much as the steps: the segment axes are fixed before any number is collected, so the model is never reshaped to fit whatever data happens to turn up.
What the build rests on, and what checks it
The two are not interchangeable. The left column produces the number; the right column tests it. When the check disagrees with the build, the answer is to find which bottom-up assumption is wrong — a unit count, a price, a take-up rate — not to split the difference between them.
- Volume actually transacted — units produced, installed, dispensed or procedures performed, counted at the level each is genuinely recorded
- Realised pricing by tier and channel, rather than one blended average applied across the whole market
- Take-up and frequency: how much of the addressable base buys, and how often it repeats
- Disclosed revenue of the companies serving the market, where filings separate it far enough to be usable
- Buyer-side spending totals — capital budgets, procurement lines, or the output of the end market the product is bought against
- Trade and customs flows, where the product crosses borders in a separately recorded form
Data sources
Published data establishes what happened. Only the people transacting in a market can say why, and what is about to change — so the two are collected separately and weighted differently.
- Commercial and product leadership at the companies that supply the market
- Procurement and specification leads at the organisations that buy it
- Distributors, integrators and channel partners, where the market is served indirectly
- Regulatory and standards specialists, where approval governs what can be sold at all
- Company filings, annual reports and investor disclosure
- Government statistics, customs records and regulatory registers
- Trade association output and standards-body publications
- Technical and peer-reviewed literature, where the market rests on a clinical or engineering claim
Interviews target procurement managers at solder and tinplate manufacturers, smelter commercial teams responsible for contract pricing, distributors handling wire and ingot allocation, and regulatory contacts overseeing mineral export licensing in producing countries. Sampling weights toward China, Indonesia and Malaysia on the supply side, since smelting capacity concentrates there, and toward electronics-manufacturing hubs in East Asia and Western Europe on the demand side, where solder and plating consumption is heaviest. Additional conversations with recyclers and scrap processors inform the secondary tin supply view, which public production statistics do not capture on their own.
Desk research draws on International Tin Association production and consumption statistics, London Metal Exchange settlement price history, national customs data under harmonized system code 8001 for refined tin trade flows, and mineral resource filings from listed producers including PT Timah and Minsur. Import and export licensing registers in Indonesia and the Democratic Republic of Congo are checked for supply disruptions, and national geological survey production reports for China, Peru and Bolivia anchor the mining-stage volumes that feed the bottom-up build.
Desk research runs across proprietary research databases including Factiva, OneSource and Hoovers alongside the public sources above. Modelling and statistical validation are run in SAS and SPSS.
Forecasting
The forecast is not a growth rate applied to a base year. It is built from the drivers that are expected to change, each one stated so a reader can disagree with it.
The forecast is built from projected refined tin consumption growth in electronics soldering, tin chemicals and renewable energy applications, layered against expected mine and smelter capacity additions in Indonesia, the Democratic Republic of Congo and Peru. Price assumptions normalize the historical volatility seen around export policy changes and smelter outages instead of extrapolating any single year's spot price. The forecast assumes gradual growth in secondary tin recovery as recycling infrastructure expands, and it assumes no prolonged export restriction from a top producing country; a sustained restriction of that kind would require the supply-side volumes to be revised.
Triangulation and validation
No figure enters a report on the strength of one source. Where the two sizing routes disagree the difference is not averaged away — the assumption causing it is isolated, tested against a third independent measure, and either corrected or carried forward as a stated limitation. Historical years are back-tested against the growth actually recorded before any forecast is allowed to run forward from them.
Historical output for 2020 through 2024 was checked against recorded production and price data before the forecast was built forward from it, confirming the model reproduces the growth already observed in those years. Segment share shifts, including the gradual move toward tin chemicals and secondary tin, were reviewed against the interview findings described above and checked for plausibility against known capacity and recycling-infrastructure additions. Sensitivities were run on tin price level, on the pace of secondary tin recovery, and on electronics solder demand, since these three inputs move the forecast total more than any others.
Confidence and limitations
Where an estimate is firm and where it is not is stated rather than left to be inferred from the precision of the number.
Confidence is strongest for the soldering and tin plating segments, where production, trade and pricing data are reported consistently across the largest producing and consuming countries. It is weaker for the tin chemicals and secondary tin figures, where reporting is thinner and recovery rates vary by processor. A sustained export restriction from a leading producing country, a faster than expected shift away from tin-based solder, or a sharp and lasting change in tin pricing would each be reason to revisit the figures presented here rather than treat them as fixed.
Every report purchase includes direct access to the lead analyst for scoping questions on the data, at no extra cost and with no separate booking process.
Request a tailored breakdown by geography, segment, or competitor set beyond what's in the standard report.
Questions This Report Answers
6 questionsWhat is the market size and growth rate, globally and by region?
How is the market segmented, and which segments lead?
Which regions and countries are covered, and how do they compare?
What are the key drivers, restraints, opportunities and challenges?
Who are the leading companies operating in this market?
What trends are expected to shape the market through the forecast period?
Frequently Asked Questions
01What is the Tin Market projected to reach?
USD 12.64 Billion by 2034, CAGR 4.19%
02What years does this report cover?
Study period 2020–2034, base year 2025, historical data 2020-2024, forecast period 2026-2034.
03Which regions are covered?
Asia Pacific, Europe, North America, Latin America, Middle East and Africa.
04Which region accounted for the largest market share?
Asia Pacific leads with 59.1% of global revenue through 2034.
05Which segment leads the market?
Metal is the largest line by Product, at 45% of revenue in 2025.
06Who are the key companies profiled?
YUNNAN TIN COMPANY GROUP LIMITED, PT TIMAH Tbk, Malaysia Smelting Corporation Berhad, Yunnan Chengfeng Nonferrous Metals Co. Ltd, Empresa Metalú, rgica Vinto S.A, Gejiu Zili Mining and Smelting Co., Ltd., Guangxi China Tin Group, Malaysia Smelting Corporation, Metallo-Chimique International N.V., Minsur S.A., Thailand Smelting and Refining Co., Ltd., and others.. Full profiles are part of the paid report.
07Can the segmentation be customized?
Yes. Custom data cuts by geography, segment, or competitor set are available on request.
Why choose CDI
Need this report shaped around your question?
The scope isn't fixed. Tell us what your team needs that the standard edition doesn't cover, and an analyst will come back on what can be adjusted and how long it takes, before you commit to anything.
Most licences include 30–60 hours of customization at no extra cost. See what each licence includes
Additional Companies
Add competitors, suppliers or the peer set you benchmark against to the companies already covered.
Deeper Competitive View
Sharpen the landscape work around your own position: product line, channel, or a named shortlist of rivals.
Extra Segment Splits
Break the market down along an axis the standard scope doesn't cut it by, or go a level deeper inside one.
Application Focus
Narrow the analysis to the specific use cases and end users your team actually sells into.
Different Time Frame
Move the base year, or widen the historical and forecast windows the study is built on.
Country-Level Detail
Go below region level into the individual countries that matter to you, rather than the standard geography split.